COMPARISON OF THE EFFICIENCY OF COATED AND UNCOATED CARBIDE TOOLS IN DUCTILE MODE END MILLING OF SODA-LIME GLASS
Comparison of the Efficiency of Coated and Uncoated Carbide Tools in Ductile Mode End Milling of Soda-lime Glass
Збережено в:
| Автори: | , , |
|---|---|
| Формат: | Дисертація |
| Мова: | Англійська |
| Опубліковано: |
2025
|
| Онлайн доступ: | http://dspace.mist.ac.bd:8080/xmlui/handle/123456789/915 |
| Теги: |
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
Схожі ресурси: COMPARISON OF THE EFFICIENCY OF COATED AND UNCOATED CARBIDE TOOLS IN DUCTILE MODE END MILLING OF SODA-LIME GLASS
- INFLUENCE OF MACHINING PARAMETERS IN HIGH-SPEED END MILLING OF TI-6AL-4V USING UNCOATED WC TOOLS UNDER NANO ABRASIVE BASED MQL APPLICATION USING RSM AND GA APPROACH /
- Ductile Design of Steel Structures /
- At the ends of the earth : a history of the polar regions /
- EXPERIMENTAL INVESTIGATION OF MODE-I FRACTURE BEHAVIOR AND FAILURE PROCESSES IN WOVEN GLASS AND GLASS-CARBON HYBRID FIBRE REINFORCED EPOXY LAMINATES /
- The End of History and The Last Man /
- OPTIMIZATION OF MACHING PARAMETERS IN HIGH SPEED END MILLING OF Ti-6AI-4V ALLOY USING RSM AND GA /