FABRICATION AND PERFORMANCE EVALUATION OF LOW COST HIGH IMPACT RESISTANT COMPOSITE
The author firstly thanks Almighty Allah for His relentless blessings to complete this thesis work. The author would like to thank Professor Dr. Afsar Ali, who oversaw his thesis, for his advice, support, and assistance with this study work. The author would like to thank his co-supervisor, Prof....
Uloženo v:
| Hlavní autor: | |
|---|---|
| Médium: | Diplomová práce |
| Jazyk: | angličtina |
| Vydáno: |
Department of Mechanical Engineering, MIST
2024
|
| On-line přístup: | http://dspace.mist.ac.bd:8080/xmlui/handle/123456789/820 |
| Tagy: |
Žádné tagy, Buďte první, kdo vytvoří štítek k tomuto záznamu!
|
| Shrnutí: | The author firstly thanks Almighty Allah for His relentless blessings to complete this
thesis work. The author would like to thank Professor Dr. Afsar Ali, who oversaw his
thesis, for his advice, support, and assistance with this study work. The author would like
to thank his co-supervisor, Prof. Dr. Enamul Hoque, for his consistent oversight,
passionate observations, and direction throughout the thesis. The department's Dean, Brig
Gen Md Humayun Kabir Bhuiyan, psc, whose guidance and support allowed the author to
labor tirelessly and introduce new ideas, is also noteworthy. The author would also like to
recognize the efforts of the lab staff, in particular Sub Asst Engr Mr. Md. Raju Ahmed
and Sub Asst Engr Mr. Dibakar Tarafdar, who assisted with the setup and execution of
experiments for the research work. Last but not the least, the author would like to express
his utmost gratitude to his family members who has been patient and supportive all
through this journey. |
|---|