MEASUREMENT OF BACKSCATTERING FACTOR FOR X RAY CALIBRATION BEAM WITH VARIOUS PHANTOMS USING IONIZATION CHAMBER AND THERMOLUMINESCENT DOSIMETER

First of all, I am grateful to the almighty Allah for giving me the courage and enthusiasm to complete the project work. This project and the thesis paper are two of the greatest additions to my insufficient knowledge and experiences. I would like to express my deep gratitude to my research super...

Descripció completa

Guardat en:
Dades bibliogràfiques
Autor principal: NUPUR, ROKSHANA PARVIN
Format: Thesis
Idioma:anglès
Publicat: Department of Nuclear Science and Engineering, MIST 2024
Accés en línia:http://dspace.mist.ac.bd:8080/xmlui/handle/123456789/798
Etiquetes: Afegir etiqueta
Sense etiquetes, Sigues el primer a etiquetar aquest registre!
Descripció
Sumari:First of all, I am grateful to the almighty Allah for giving me the courage and enthusiasm to complete the project work. This project and the thesis paper are two of the greatest additions to my insufficient knowledge and experiences. I would like to express my deep gratitude to my research supervisor, Dr. Md. Shakiur Rahman, Chief Scientific Officer of secondary standard dosimetry laboratory (SSDL), Bangladesh Atomic Energy Commission (BAEC) and Director, Nuclear Safety Security and Safeguards Division (NSSSD) of Bangladesh Atomic Energy Commission (BAEC), Agargaon, Dhaka, for his patient guidance, enthusiastic encouragement, and useful critiques of this research work. I would also like to thank my co-supervisor, Dr. Md. Azizur Rahman, Professor, Department of Nuclear Science and Engineering, MIST, Dhaka, for his advice and assistance in keeping me updated on this project. I'd also like to thank my Department Head, Col. Molla Md. Zubaer, SPP, te., Former Department Head, Col. Salahuddin Zafor, our Program Coordinator. Lt. Col. Foysal Kadir, and Former Program Coordinator, Lt. Col. Md. Altab Hossain PhD., for their unwavering support and guidance from the very beginning and all through the seven-year eventful journey. Finally, and not least, I wish to thank all of my classmates and office staff for their support and encouragement throughout the study and thesis work.