EXPRESS BUS RIDERSHIP MODELING IN EMME SOFTWARE
EMME software is extensively used in the planning of urban roads and transit networks. But unfortunately, current EMME-based models are not capable of properly representing express bus services in the Greater Toronto Area (GTA). This study focuses on finding a solution to this problem. Three approac...
Đã lưu trong:
| Tác giả chính: | |
|---|---|
| Định dạng: | Bài viết |
| Ngôn ngữ: | Tiếng Anh |
| Được phát hành: |
R&D Wing, MIST
2017
|
| Những chủ đề: | |
| Truy cập trực tuyến: | http://hdl.handle.net/123456789/370 |
| Các nhãn: |
Không có thẻ, Là người đầu tiên thẻ bản ghi này!
|
| Tóm tắt: | EMME software is extensively used in the planning of urban roads and transit networks. But unfortunately, current EMME-based models are not capable of properly representing express bus services in the Greater Toronto Area (GTA). This study focuses on finding a solution to this problem. Three approaches are investigated. First, different combinations of user adjustable parameters of EMME are explored to see if they result in improved express bus assignments. Second, adjustments to the representation of the express bus attributes (artificially decreasing speeds and increasing headways for the express bus routes) are investigated. Finally, a sub-mode split model is developed in which original demand matrix is split into two demand matrices (one for express bus and other for local bus) and assigned separately to the GTA transit network in EMME. For this purpose logit mode choice models are developed and estimated to predict express bus and local bus demand. |
|---|