Nonlinear Finite Element Analysis Of Reinforced Concrete Plates In Punching Shear
This is an attempt to carry out nonlinear analysis of reinforced concrete flat plates using 3 D-Brick elements in combination with Link elements. A 3-dimensional reinforced concrete flat plate model is generated. The formulation has been checked against experimental results of tests on slabs subjec...
Guardat en:
| Autors principals: | , |
|---|---|
| Format: | Article |
| Idioma: | anglès |
| Publicat: |
R&D Wing, MIST
2015
|
| Matèries: | |
| Accés en línia: | http://hdl.handle.net/123456789/215 |
| Etiquetes: |
Sense etiquetes, Sigues el primer a etiquetar aquest registre!
|
| Sumari: | This is an attempt to carry out nonlinear analysis of reinforced concrete flat plates using 3 D-Brick elements in combination with Link elements. A 3-dimensional reinforced concrete flat plate model is generated. The formulation has been checked against experimental results of tests on slabs subjected to punching shear. From a comparison of the numerical and the experimental results, it is concluded that the generated model by the Finite Element Analysis package ANSYS is capable of analysing reinforced concrete plates with significant degree of accuracy. A few parametric studies has also been undertaken to determine the behaviour of plates with and without shear reinforcements and/or compression reinforcement. |
|---|