-
ASSESSING THE FEASIBILITY OF PYROLYZED FUEL FROM PLASTIC MATERIAL AS A RENEWABLE ENERGY /
-
FEBRICATION AND PERFORMANCE EVALUATION OF SUSTAINABLE JUTE FIBER-PLASTIC WASTE FOR CLIMATE RESILIENT BUILDING APPLICATIONS /
-
THERMAL HYDRAULIC PERFORMANCE ENHANCEMENT OF MICROCHANNEL HEAT SINKS VIA INNOVATIVE CHANNEL DESIGNS AND DIFFERENT NANOFLUIDS: A NUMERICAL STUDY/
-
THE COST OF EMISSION AND EXCESS FUEL CONSUMPTION FROM THE AUTOMOTIVE VEHICLES IN DHAKA CITY /
-
DEVELOPMENT OF BULLET PROTECTIVE PANEL FROM RECYCLED TIRES /
-
STUDY OF A SELF MADE BIOMASS STOVE AND ELECTRICITY GENERATOR FROM WASTE HEAT USING THERMOELECTRIC GENERATOR / Md. Mominul Haque, Md. Mahmoodul Haque, Imteaz Osmani, Md. Asad Hossain .
-
ENHANCED PEM FUEL CELL PERFORMANCE USING PLATINUM CATALYSTS SUPPORTED ON CARBON BLACK-GRSPHENE HYBRID SUPPORTS PREPARED BY A SIMPLE CHEMICAL REDUCTION METHOD /
-
The Nuclear Fuel Cycle : from ore to waste /
-
RECYCLED PLASTIC WASTE IN ROADS: OPTIONS AND OPPORTUNITIES IN BANGLADESH /
-
FABRICATION AND CHARACTERIZATION OF Li0.5Ce (0.5-x) SmxWO4; x=0,0.1,0.5 ELECTROLYTE MATERIAL SOLID OXIDE FUEL CELL /
-
FABRICATION AND CHARACTERIZATION OF Baccaros Yous xGdxZn030 (X=0, 0.05, 0.1, 0.15) AS A NOVEL ELECTROLYTE FOR PROTON-CONDUCTING SOLID OXIDE FUEL CELL /
-
DESIGN AND DEVELOPMENT OF A NOVEL BIODEISEL PROCESSOR AND PERFORMANCE ANALYSIS OF B1OO BIO DIESEL PRODUCED FROM SOYBEAN OIL / Md.Shihab Uddin, Sarjil Mehedi, M A.Masum Bulbul Chowdhwary.
-
DEVELOPMENT OF AN AUTONOMOUS RAIL INSPECTION MODULE LEVERAGING AI PREDICTIVE MODELS FOR DEVELOPING COUNTRIES /
-
STUDY OF THE EFFECT OF MOISTUCE CONTENT OF BIOMASS FUEL IN PERFORMANCE OF DIFFERENT TYPE OF COOKING STOVE /
-
PERFORMANCE ANALYSIS OF BIO DIESEL BLENDS EXTRACTED FROM NEWLY DEVELOPED BIO DIESEL PROCESSOR /
-
OIL GAS TRANSPORTATION FROM OFF SHORE TO ON SHARE CFD APPROACH /
-
DEVELOPMENT OF GRAPHENE BASED HELMET MATERIAL FOR MILITARY APPLICATION /
-
DEVELOPMENT AND 3D PRINTING OF PLA-BIOCOMPOSITE REINFORCED WITH SHORT BAMBOO FIBER AND EVALUATING PERFORMANCE /
-
EFFECT OF WASTE POLYPROPYLE PLASTIC ON SHRINKAGE PROPERTIES OF CONCRETE /
-
DESIGN AND DEVELOPMENT OF A CONTROL MECHANISM FOR SELF-BALANCING MOTORBIKE /
-
INVESTIGATION ON DEVELOPING GRAPHENE REINFORCED MULTISCALE COMPOSITE FOR AUTOMOTIVE BUMPERS /
-
DESIGN AND DEVELOPMENT OF A CONTROL SYSTEM FOR SELF BALANCINGTWO WHEELER ROBOT /
-
DESIGN AND DEVELOPMENT OF A UNIVERSAL ROBOT-ASSISTED REHABILITATION SYSTEM FOR MUSCULOSKELETAL PHYSIOTHERAPY /
-
Fundamentals of Petroleum Refining /
-
DEVELOPMENT AND CHARACTEROZATION OF GRAPHENE-ENHANCED CARBON FIBER/EPOXY COMPOSITE FOR AUTOMOTIVE BUMPER APPLICATIONS /
-
FEBRICATION AND PERFORMANCE EVALUATION OF SUSTAINABLE JUTE FIBER-PLASTIC WASTE FOR CLIMATE RESILIENT BUILDING APPLICATIONS /
-
FABRICATION AND CHARACTERIZATION OF Li0.5Ce (0.5-x) SmxWO4; x=0,0.1,0.5 ELECTROLYTE MATERIAL SOLID OXIDE FUEL CELL /
-
STUDY OF TWO PHASE LOOP THERMOSYPHON BY USING VARIOUS EVAPORATOR SURFACE GEOMETRIES WITH DIFFERENT WORKING FLUIDS /
-
DETERMINATION OF CRITICAL SPEED OF A SHAFT /
-
DAMAGE CHARACTERIZATION OF GLASS FIBRE REINFORCED POLYMER (GFRP) COMPOSITES /
-
An Introduction to the Mechanics of Solids /
-
DESIGN AND DEVELOPMENT OF A NOVEL BIODEISEL PROCESSOR AND PERFORMANCE ANALYSIS OF B1OO BIO DIESEL PRODUCED FROM SOYBEAN OIL / Md.Shihab Uddin, Sarjil Mehedi, M A.Masum Bulbul Chowdhwary.
-
DESIGN AND FABRICATION OF A VAPOR ABSORPTION REFRIGERATION SYSTEM / Mosharrouf Hossain, S.M Rafid Rahman, Saadman Shoumik.
-
STUDY OF SMALL AND MEDIUM ENTERPRISES (SME) PRODUCTS IN BANGLADESH: PERFORMANCE AND QUALITY IMPROVEMENT OF A SELECTED PRODUCT / Muksadur Rahman, Md Nazrul Huda Aslam, Jakia sultana.
-
A COMPARATIVE STUDY ON EMISSION OF GASOLINE AND NATURAL GAS DRIVEN VEHICLE ALONG WITH ITS EFFECT ON ENVIRONMENT AND HEALTH ISSUES / Capt Md. Rashedul Islam Lt. Most Irana Yeasmin, Khalid Bin Md Kamruzzaman, Zawad Abedin .
-
ONE DIMENSIONAL FLOW THROUGH PIPE / Md. Shakib Mamud, Md. Faisal Hasan, Kazi Abdul Al Moin Rumu.S M Mahid.
-
STUDY OF A SELF MADE BIOMASS STOVE AND ELECTRICITY GENERATOR FROM WASTE HEAT USING THERMOELECTRIC GENERATOR / Md. Mominul Haque, Md. Mahmoodul Haque, Imteaz Osmani, Md. Asad Hossain .
-
DETERMINATION OF CO-EFFICIENT OF PERFORMANCE (COP) OF A VAPOR COMPRESSION REFRIGERATION CYCLE USING DIFFERENT REFRIGERATION'S / S M Sabahat Hossain, Md. Tanjirul Islam, Md. Abir Mahmud .
-
STUDY AND DEVELOPMENT OF EXHAUST SYSTEM,ANALYZING THE PERFORMANCE AND REDUCING EXHAUST NOISE OF A CAR, TOYOTA E-90 / Navid Anjum, Amitava Ghosh Dastidar, Rajib Uddin Rony, Reasat Azam .
-
IMPROVEMENT OF VEHICLE EXHAUST BY USING MUSTARD OIL BASED BIO DIESEL / Shafquat Hasan Noor, Susmony Datta, Khandokar Shoveet Faraz .
-
A COMPARATIVE STUDY OF FULL PROPERTIES, PERFORMANCE TEST AND EXHAUST GAS ANALYSIS WITH THE CONVENTIONAL FOSSIL DIESEL, NEAT BIO DIESEL AND THEIR BLEND / Hossain, Md. Alamin, Shabab Mottauin Chowdhary, Monzur Ul Islam
-
THE EFFECT OF ETHANOL AS WORKING FLUID ON THE PERFORMANCE OF DIFFERENT TYPES OF CLOSED LOOP PULSATING HEAT PIPE / Mehrin Chowdhury, Sanjida parveen, Nawshad Arslan Islam, Sayed Mahmud Mufti.
-
EXPERIMENTAL INVESTIGATION THE PERFORMANCE OF OPEN LOOP PULSATING HEAT PIPE / Halima Khatun Tahmin, Rumana Parvin Rinky, Afrina Khan Piya, Tonima Afrose.
-
HYDROGEN GAS, AN ALTERNATIVE ENERGY SOURCE FOR IC ENGINE / K M Shohidullah Ferdous Priyo, Chowdhury Raihan Uddin, Atika Khan. .
-
EXPERIMENTAL STUDY OF FORCED CONVECTION HEAT TRANSFER THROUGH TUBES WITH LON / Flo Amina Ahmed Suria, Salma Noor Jahan, Nusrat Jahan .
-
DEVELOPMENT OF A DIVER PROPULSION VEHICLE SIMULATOR FOR SEARCH AND RESCUE OPERATION /
-
AERODYNAMIC INVESTIGATION OF WIND TURBINES WITH SPLIT TIPS /
-
MODELING THE TRANSMISSION OF AIR BORNE PATHOGENS TO HUMANS UNDER VARYING ENVIRONMENTAL CONDITIONS /