Podobné jednotky: OPTIMIZATION OF HIGH-SPEED END MILLING OF INCONEL 718 USING AI₂O3, DISPERSED NATURAL OIL IN MOL WITH RSM AND GA-ANN /
- OPTIMIZATION OF MACHINING PARAMETERS IN HIGH-SPEED END MILLING OF INCONEL 718 USING WC TOOLS UNDER NANO PARTICLES BASED MQL APPLICATIONS USING RSM AND GA APPROACH /
- OPTIMIZATION OF MACHING PARAMETERS IN HIGH SPEED END MILLING OF Ti-6AI-4V ALLOY USING RSM AND GA /
- Thermoelectric cooling based experiment and simulation of Inconel 718 machining with plain carbide tool
- INFLUENCE OF MACHINING PARAMETERS IN HIGH-SPEED END MILLING OF TI-6AL-4V USING UNCOATED WC TOOLS UNDER NANO ABRASIVE BASED MQL APPLICATION USING RSM AND GA APPROACH /
- AN EXPERIMENTAL INVESTIGATION OF POWDER ASSISTED ELECTRICAL DISCHARGE MACHINING OF MILD STEEL & INCONEL 718 AND PARAMETRIC OPTIMIZATION /
- COMPARISON OF THE EFFICIENCY OF COATED AND UNCOATED CARBIDE TOOLS IN DUCTILE MODE END MILLING OF SODA-LIME GLASS
Téma: Industrial and Production Engineering
- INVESTIGATION ON SURFACE ROUGHNESS AND TOOL WEAR FOR DIFFERENT DRILL BIT GEOMETRY IN DRILLING OPERATION ON MILD STEEL /
- INVESTIGATION OF HARDENED CUTTING TOOL FOR TURNING OF MILD STEEL IN DRY CUTTING METHOD /
- OPTIMIZATION OF MACHINING PARAMETERS IN HIGH-SPEED END MILLING OF INCONEL 718 USING WC TOOLS UNDER NANO PARTICLES BASED MQL APPLICATIONS USING RSM AND GA APPROACH /
- EFFECTIVENESS OF HIGH-SPEED MACHINING ON HARDEN DIE STEEL UNDER NANO PARTICLE BASED MQL (MINIMUM QUANTITY LUBRICANT) APPLICATION /
- INFLUENCE OF MACHINING PARAMETERS IN HIGH-SPEED END MILLING OF TI-6AL-4V USING UNCOATED WC TOOLS UNDER NANO ABRASIVE BASED MQL APPLICATION USING RSM AND GA APPROACH /
- PERFORMANCE ANALYSIS OF EAF DUST REINFORCED ALUMINIUM BASED METAL MATRIX COMPOSITE /
Téma: This Thesis Paper of IPE in BSc Program.
- AI-BASED HYBRID FRAMEWORK FOR SOLAR PV FAULT, DETECTION AND POWER GENERATION FORECASTING /
- FABRICATION AND CHARACTERIZATION OF PLA-CASSAVA STARCH BIODEGRADABLE FILMS USING HOT PRESSING /
- HIGH SPEED MACHINING OF TIGA14V USING HYBRID NANOFLUID BASED MINIMUM QUANTITY LUBRICATION (HNMOL) /
- COMPARATIVE ASSESSMENT OF COMMERCIAL AND OYSTERSHELL BIOWASTE DERIVED HYDROXYAPATITE AS SUSTAINABLE REINFORCEMENTS IN A190Zn10 METAL MATRIX COMPOSITES /
- OPTIMIZATION OF PROCESS PARAMETERS MIXED EDM OF Ti-6Al-4V USING RSM NANG POWDER /
- MICROSTRUCTURES AND MECHANICAL PROPERTIES OF HYDROXYAPATITE BIO-CERAMICS EXTRACTED THROUGH EGGSHELL AND FABRICATED BY SLA 3D PRINTING /