-
PERFORMANCE ANALYSIS OF BIO DIESEL BLENDS EXTRACTED FROM NEWLY DEVELOPED BIO DIESEL PROCESSOR /
-
DESIGN OF AUTOMATED BIO DIESEL BLEND PLANT AND ANALYSIS OF ROTATIONAL EFFECT ON BIO DIESEL BLENDS /
-
PERFORMANCE ANALYSIS OF BIO DIESEL BLENDS EXTRACTED FROM NEWLY DEVELOPED BIODIESEL PROCESSOR
-
IMPROVEMENT OF VEHICLE EXHAUST BY USING MUSTARD OIL BASED BIO DIESEL / Shafquat Hasan Noor, Susmony Datta, Khandokar Shoveet Faraz .
-
Marine diesel engines /
-
A COMPARATIVE STUDY OF FULL PROPERTIES, PERFORMANCE TEST AND EXHAUST GAS ANALYSIS WITH THE CONVENTIONAL FOSSIL DIESEL, NEAT BIO DIESEL AND THEIR BLEND / Hossain, Md. Alamin, Shabab Mottauin Chowdhary, Monzur Ul Islam
-
PERFORMANCE OF RAP MIXTURE REJUVENATED BY RECYCLED SOYBEAN OIL /
-
Marine diesel engines : maintenance, troubleshooting, and repair /
-
Feasibility Of Producing Lightweight Concrete Using Indigenous Materials Without Autoclaving
-
Pounder's marine diesel engines and gas turbines /
-
Bio-integration of Medical Implant Materials : Science and Design /
-
FUSION OF FINGERPRINT AND HEARTBEAT BIO METRICS FOR SECURITY ENHANCEMENT /
-
Pipelined processor farms : structured design for embedded parallel systems /
-
Micro processor applications handbook /
-
COMPARATIVE STUDY OF HYDRODYNAMIC OF A SHIP WITH CONVENTIONAL AND BIO-INSPIRED BOW CONFIGURATIONS /
-
PPERFORMANCE EVALUATION OF SUSTAINABLE ECO-FRIENDLY HOLLOW CONCRETE BLOCKS PRODUCED USING DRIED WATER HYACINTH FIBER, GLASS, AND TILES AS PARTIAL SAND REPLACEMENT /
-
EVALUATION AND INTRODUCTION OF A HYBRID DIESEL-ELECTRIC PROPULSION SYSTEM FOR INLAND PASSENGER VESSELS OF BANGLADESH: ENVIRONMENTAL AND OPERATIONAL BENEFITS/
-
B.Sc. physics :
-
B. Sc. physics /
-
B. Sc. physics : nuclear physics and solid state physics and electronics /
-
B.Sc.Physics : Volume 1 /
-
DEVELOPMENT AND PERFORMANCE EVALUATION OF SUSTAINABLE WATER-BASED DRILLING FLUIDS USING AGRICULTURAL BIO-WASTE ADDITIVES/
-
A COMPREHENSIVE STUDY OF FEASIBILITY OF A GRID CONNECTED SOLAR BIO-GAS SYSTEM IN SAVAR CANTONMENT AREA /
-
MICROSTRUCTURES AND MECHANICAL PROPERTIES OF HYDROXYAPATITE BIO-CERAMICS EXTRACTED THROUGH EGGSHELL AND FABRICATED BY SLA 3D PRINTING /
-
A STUDY ON MIRPUR-12 TO ROKEYA SHARANI ROAD WITH SPECIAL EMPHASIS ON PEDESTRIAN SAFETY AND FACILITY /
-
DESIGN AND DEVELOPMENT OF A NOVEL BIODEISEL PROCESSOR AND PERFORMANCE ANALYSIS OF B1OO BIO DIESEL PRODUCED FROM SOYBEAN OIL / Md.Shihab Uddin, Sarjil Mehedi, M A.Masum Bulbul Chowdhwary.
-
DESIGN AND FABRICATION OF A VAPOR ABSORPTION REFRIGERATION SYSTEM / Mosharrouf Hossain, S.M Rafid Rahman, Saadman Shoumik.
-
STUDY OF SMALL AND MEDIUM ENTERPRISES (SME) PRODUCTS IN BANGLADESH: PERFORMANCE AND QUALITY IMPROVEMENT OF A SELECTED PRODUCT / Muksadur Rahman, Md Nazrul Huda Aslam, Jakia sultana.
-
A COMPARATIVE STUDY ON EMISSION OF GASOLINE AND NATURAL GAS DRIVEN VEHICLE ALONG WITH ITS EFFECT ON ENVIRONMENT AND HEALTH ISSUES / Capt Md. Rashedul Islam Lt. Most Irana Yeasmin, Khalid Bin Md Kamruzzaman, Zawad Abedin .
-
ONE DIMENSIONAL FLOW THROUGH PIPE / Md. Shakib Mamud, Md. Faisal Hasan, Kazi Abdul Al Moin Rumu.S M Mahid.
-
STUDY OF A SELF MADE BIOMASS STOVE AND ELECTRICITY GENERATOR FROM WASTE HEAT USING THERMOELECTRIC GENERATOR / Md. Mominul Haque, Md. Mahmoodul Haque, Imteaz Osmani, Md. Asad Hossain .
-
MODELING AND SIMULATION OF PRESSURE WAVE PROPAGATION OF AN AUTOMOTIVE EXPLOSION ENGINE MUFFLER USING COMSOL MULTI PHYSICS SOFTWARE /
-
STUDY OF TWO PHASE LOOP THERMOSYPHON BY USING VARIOUS EVAPORATOR SURFACE GEOMETRIES WITH DIFFERENT WORKING FLUIDS /
-
STUDY ON PERFORMANCE CHARACTERISTICS OF CENTRIFUGAL PUMP AND CONSTRUCTION OF AN EXPERIMENTAL SET UP FOR THE STUDY /
-
A STUDY OF BIOMASS BRIQUETTE IN BANGLADESH /
-
Fabrication & Performance Test Of A High Temperature Differential Stirling Engine /
-
PERFORMANCE EVALUATION OF 1.68 KWP DC-OPERATED SOLAR PUMP WITH AUTO TRACKERS USING MICRO CONTROLLER BASED DATA AC ACQUISITION SYSTEM /
-
THE COST OF EMISSION AND EXCESS FUEL CONSUMPTION FROM THE AUTOMOTIVE VEHICLES IN DHAKA CITY /
-
STUDY AND DETERMINATION OF THERMAL CONTACT CONDUCTANCE /
-
DESIGN OPTIMIZATION OF WORM GEAR /
-
BIOMASS BRIQUETTE –AN ALTERNATIVE SOURCE OF ENERGY IN BANGLADESH /
-
DESIGN AND CONSTRUCTION OF A MECHANICAL MOTION RECTIFIER (MMR) /
-
DESIGN IMPROVENMENT AND DEVELOPMENT OF A CLOSED LOOP SOLAR HEAT COLLECTOR WITH DATA ACQUISITION SYSTEM /
-
OIL GAS TRANSPORTATION FROM OFF SHORE TO ON SHARE CFD APPROACH /
-
DESIGN & CONSTRUCTION OF A SPEED BUMP ENERGY GENERATOR /
-
PERFORMANCE ANALYSIS OF LUBRICANT FOR AUTOMOBILE ENGINES BY CONDITION MONITORING /
-
DESIGN AND DEVELOPMENT OF A COMPACT SPIRAL COIL HEAT EXCHANGE AND COMPARATIVE ANALYSIS OF ITS PERFORMANCE /
-
AUDIT AND MAINTENANCE INSPECTION OF ELEVATORS IN BANGLADESH /
-
MECHANICAL PERFORMANCE OF HYBRID GRAPHENE- BASALT FIBER COMPOSITES FOR LIGHTWEIGHT SPAR CAP APPLICATIONS IN WIND TURBINES /
-
An Introduction to the Mechanics of Solids /
-
DESIGN AND DEVELOPMENT OF A NOVEL BIODEISEL PROCESSOR AND PERFORMANCE ANALYSIS OF B1OO BIO DIESEL PRODUCED FROM SOYBEAN OIL / Md.Shihab Uddin, Sarjil Mehedi, M A.Masum Bulbul Chowdhwary.
-
DESIGN AND FABRICATION OF A VAPOR ABSORPTION REFRIGERATION SYSTEM / Mosharrouf Hossain, S.M Rafid Rahman, Saadman Shoumik.
-
STUDY OF SMALL AND MEDIUM ENTERPRISES (SME) PRODUCTS IN BANGLADESH: PERFORMANCE AND QUALITY IMPROVEMENT OF A SELECTED PRODUCT / Muksadur Rahman, Md Nazrul Huda Aslam, Jakia sultana.
-
A COMPARATIVE STUDY ON EMISSION OF GASOLINE AND NATURAL GAS DRIVEN VEHICLE ALONG WITH ITS EFFECT ON ENVIRONMENT AND HEALTH ISSUES / Capt Md. Rashedul Islam Lt. Most Irana Yeasmin, Khalid Bin Md Kamruzzaman, Zawad Abedin .
-
ONE DIMENSIONAL FLOW THROUGH PIPE / Md. Shakib Mamud, Md. Faisal Hasan, Kazi Abdul Al Moin Rumu.S M Mahid.
-
STUDY OF A SELF MADE BIOMASS STOVE AND ELECTRICITY GENERATOR FROM WASTE HEAT USING THERMOELECTRIC GENERATOR / Md. Mominul Haque, Md. Mahmoodul Haque, Imteaz Osmani, Md. Asad Hossain .
-
DESIGN AND FABRICATION OF A FLAT PLATE SOLAR HEAT COLLECTION WITH IMPROVED HEAT TRANSFER APPLICATION AND DATE ACQUISITION SYSTEM /
-
AERODYNAMIC PERFORMANCE ANALYSIS AND PROPULSION SYSTEM DESIGN OF AN UNMANNED AERIAL VEHICLE USING NACA 4415 PROFILE / LT Tarik, LT Nabila, Nayeema parvin .
-
HEAT TRANSFER CHARACTERISTICS OF A CLOSED LOOP PULSATING HEAT PIPE WITH FIN AND WIRE INSERT / Lt. Tauhidul Islam, Rasel A Sultan, Noor Mohammad Hasan.
-
DETERMINATION OF CO-EFFICIENT OF PERFORMANCE (COP) OF A VAPOR COMPRESSION REFRIGERATION CYCLE USING DIFFERENT REFRIGERATION'S / S M Sabahat Hossain, Md. Tanjirul Islam, Md. Abir Mahmud .
-
STUDY AND DEVELOPMENT OF EXHAUST SYSTEM,ANALYZING THE PERFORMANCE AND REDUCING EXHAUST NOISE OF A CAR, TOYOTA E-90 / Navid Anjum, Amitava Ghosh Dastidar, Rajib Uddin Rony, Reasat Azam .
-
IMPROVEMENT OF VEHICLE EXHAUST BY USING MUSTARD OIL BASED BIO DIESEL / Shafquat Hasan Noor, Susmony Datta, Khandokar Shoveet Faraz .
-
A COMPARATIVE STUDY OF FULL PROPERTIES, PERFORMANCE TEST AND EXHAUST GAS ANALYSIS WITH THE CONVENTIONAL FOSSIL DIESEL, NEAT BIO DIESEL AND THEIR BLEND / Hossain, Md. Alamin, Shabab Mottauin Chowdhary, Monzur Ul Islam
-
THE EFFECT OF ETHANOL AS WORKING FLUID ON THE PERFORMANCE OF DIFFERENT TYPES OF CLOSED LOOP PULSATING HEAT PIPE / Mehrin Chowdhury, Sanjida parveen, Nawshad Arslan Islam, Sayed Mahmud Mufti.
-
EXPERIMENTAL INVESTIGATION THE PERFORMANCE OF OPEN LOOP PULSATING HEAT PIPE / Halima Khatun Tahmin, Rumana Parvin Rinky, Afrina Khan Piya, Tonima Afrose.
-
HYDROGEN GAS, AN ALTERNATIVE ENERGY SOURCE FOR IC ENGINE / K M Shohidullah Ferdous Priyo, Chowdhury Raihan Uddin, Atika Khan. .
-
EXPERIMENTAL STUDY OF FORCED CONVECTION HEAT TRANSFER THROUGH TUBES WITH LON / Flo Amina Ahmed Suria, Salma Noor Jahan, Nusrat Jahan .
-
ANALYSIS OF METEOROLOGICAL DATA OF BANGLADESH AND CONSTRUCTION OF A MODEL OF MICRO HYDRO POWER PLANT / Mohiuddin Siddique, Syeda Bushra Haider, Maliha Maisha Rahman
-
RAIN WATER HARVESTING AND UTILIZATION / Md. Arif Hannan, Ashek Ahmed, Md. Saiful Islam, Md. Hafizur Rahman Khan .
-
A COMPREHENSIVE DESIGN AND CONSTRUCTION MACHINE AND ANALYSIS OF COCONUT OIL / Mahmudul Hasan Kawser, Humaun Kabir, Flt. Lt. GDP Premadasa, Nazratun Nayeem .
-
FABRICATION AND PERFORMANCE OF A LOW COST CONTROLLED ROBOTIC ARM FOR INDUSTRIAL APPLICATION / Mushfik Ul Alam Radient, Sanad Ranjan Saha, Md. Kamrul Islam Patwary.
-
STUDY OF COST –EFFECTIVE CRYSTALLINE TYPE SOLAR CELL MANUFACTURING PRACTICES AND CHARACTERIZATION TEST IN BANGLADESH / Antara Majumdar, Fariba Mohammadi, Ali Ahmed .