Channels EXPERIMENTAL INVESTIGATION ON THE EFFECT OF INSERTED WIRE ON THE CHARACTERISTICS OF A CLOSED LOOP PULSATING HEAT PIPE (CLPHP) /
EXPERIMENTAL INVESTIGATION ON THE CHARACTERISTICS OF A CLOSED LOOP PULSATING HEAT PIPE (CLPHP) FOR DIFFERENT FLUIDS
HEAT TRANSFER CHARACTERISTICS OF A CLOSED LOOP PULSATING HEAT PIPE WITH FIN AND WIRE INSERT / Lt. Tauhidul Islam, Rasel A Sultan, Noor Mohammad Hasan.
EFFECT OF FIN ON THE PERFORMANCE CHARACTERISTICS OF CLOSE AND OPEN LOOP PULSATING HEAT PIPE
Performance Comparison of Fluids in a Closed Loop Pulsating Heat Pipe
EXPERIMENTAL INVESTIGATION THE PERFORMANCE OF OPEN LOOP PULSATING HEAT PIPE / Halima Khatun Tahmin, Rumana Parvin Rinky, Afrina Khan Piya, Tonima Afrose.
EXPERIMENTAL INVESTIGATION INTO THE THERMAL PERFORMANCE OF A CLOSED-LOOP PULSATING HEAT PIPE USING WATER-ETHANOL BINARY MIXTURES FOR ELECTRONICS COOLING /
PERFORMANCE ANALYSIS OF A CLOSED-LOOP PULSATING HEAT PIPE FOR ENHANCEMENT OF PHOTOVOLTAIC CELL EFFICIENCY /
THE EFFECT OF ETHANOL AS WORKING FLUID ON THE PERFORMANCE OF DIFFERENT TYPES OF CLOSED LOOP PULSATING HEAT PIPE / Mehrin Chowdhury, Sanjida parveen, Nawshad Arslan Islam, Sayed Mahmud Mufti.
DESIGN OF A CLOSED LOOP SUBSONIC WIND TUNNEL /
HEAT TRANSFER ENHANCEMENT IN A PIPE FLOW USING A ROTATING TWISTED TAPE INSERT
PERFORMANCE ANALYSIS OF PULSATING HEAT PIPE INCORPORATED WITH TESLA TYPE D-VALVE
PERFORMANCE ANALYSIS OF PULSATING HEAT PIPE INCORPORATED WITH TESLA TYPE D- VALVE /
ENHANCEMENT OF HEAT TRANSFER IN A PIPE FLOW USING A SWIRLING PERFORATED TWISTED TAPE INSERT
Design And Fabrication Of A Bench Mounted Closed Loop Wind Tunnel
DESIGN IMPROVENMENT AND DEVELOPMENT OF A CLOSED LOOP SOLAR HEAT COLLECTOR WITH DATA ACQUISITION SYSTEM /
House wiring
FLOW CHARACTERISTICS AND HEAT TRANSFER CHARACTERISTICS OVER NACA 4415 AIRFOIL
COMPARISON OF AERODYNAMIC PROPERTIES OF TRADITIONAL TURBINE BLADES AND CLOSED-LOOP TURBINE BLADES FOR WIND ENERGY EXTRACTION /
A P-MEDIAN CLOSED LOOP MODEL USING TABU SEARCH FOR HEALTH CARE SUPPLY IN BANGLADESH /
Electrical wiring, estimating & costing /
Electrical Wiring, Estimating & Costing /
Electrical wiring, estimating & costing /
Electrical Wiring, Estimating & Costing /
ENHANCEMENT OF TURBULENT FLOW HEAT TRANSFER IN A CIRCULAR TUBE WITH POROUS DISE INSERTS /
DESIGN AND DEVELOPMENT OF A NOVEL BIODEISEL PROCESSOR AND PERFORMANCE ANALYSIS OF B1OO BIO DIESEL PRODUCED FROM SOYBEAN OIL / Md.Shihab Uddin, Sarjil Mehedi, M A.Masum Bulbul Chowdhwary.
DESIGN AND FABRICATION OF A VAPOR ABSORPTION REFRIGERATION SYSTEM / Mosharrouf Hossain, S.M Rafid Rahman, Saadman Shoumik.
STUDY OF SMALL AND MEDIUM ENTERPRISES (SME) PRODUCTS IN BANGLADESH: PERFORMANCE AND QUALITY IMPROVEMENT OF A SELECTED PRODUCT / Muksadur Rahman, Md Nazrul Huda Aslam, Jakia sultana.
A COMPARATIVE STUDY ON EMISSION OF GASOLINE AND NATURAL GAS DRIVEN VEHICLE ALONG WITH ITS EFFECT ON ENVIRONMENT AND HEALTH ISSUES / Capt Md. Rashedul Islam Lt. Most Irana Yeasmin, Khalid Bin Md Kamruzzaman, Zawad Abedin .
ONE DIMENSIONAL FLOW THROUGH PIPE / Md. Shakib Mamud, Md. Faisal Hasan, Kazi Abdul Al Moin Rumu.S M Mahid.
STUDY OF A SELF MADE BIOMASS STOVE AND ELECTRICITY GENERATOR FROM WASTE HEAT USING THERMOELECTRIC GENERATOR / Md. Mominul Haque, Md. Mahmoodul Haque, Imteaz Osmani, Md. Asad Hossain .
MODELING AND SIMULATION OF PRESSURE WAVE PROPAGATION OF AN AUTOMOTIVE EXPLOSION ENGINE MUFFLER USING COMSOL MULTI PHYSICS SOFTWARE /
STUDY OF TWO PHASE LOOP THERMOSYPHON BY USING VARIOUS EVAPORATOR SURFACE GEOMETRIES WITH DIFFERENT WORKING FLUIDS /
STUDY ON PERFORMANCE CHARACTERISTICS OF CENTRIFUGAL PUMP AND CONSTRUCTION OF AN EXPERIMENTAL SET UP FOR THE STUDY /
A STUDY OF BIOMASS BRIQUETTE IN BANGLADESH /
Fabrication & Performance Test Of A High Temperature Differential Stirling Engine /
PERFORMANCE EVALUATION OF 1.68 KWP DC-OPERATED SOLAR PUMP WITH AUTO TRACKERS USING MICRO CONTROLLER BASED DATA AC ACQUISITION SYSTEM /
THE COST OF EMISSION AND EXCESS FUEL CONSUMPTION FROM THE AUTOMOTIVE VEHICLES IN DHAKA CITY /
STUDY AND DETERMINATION OF THERMAL CONTACT CONDUCTANCE /
DESIGN OPTIMIZATION OF WORM GEAR /
BIOMASS BRIQUETTE –AN ALTERNATIVE SOURCE OF ENERGY IN BANGLADESH /
DESIGN AND CONSTRUCTION OF A MECHANICAL MOTION RECTIFIER (MMR) /
DESIGN IMPROVENMENT AND DEVELOPMENT OF A CLOSED LOOP SOLAR HEAT COLLECTOR WITH DATA ACQUISITION SYSTEM /
OIL GAS TRANSPORTATION FROM OFF SHORE TO ON SHARE CFD APPROACH /
DESIGN & CONSTRUCTION OF A SPEED BUMP ENERGY GENERATOR /
PERFORMANCE ANALYSIS OF LUBRICANT FOR AUTOMOBILE ENGINES BY CONDITION MONITORING /
DESIGN AND DEVELOPMENT OF A COMPACT SPIRAL COIL HEAT EXCHANGE AND COMPARATIVE ANALYSIS OF ITS PERFORMANCE /
AUDIT AND MAINTENANCE INSPECTION OF ELEVATORS IN BANGLADESH /
DESIGNING MANUFACTURING OF AN IMPACT TESTING MACHINE TO STUDY STRENGTH OF PVC PIPE /
NUMERICAL INVESTIGATION OF CONVECTIVE HEAT TRANSFER FOR TURBULENT FLOW IN A PERIODICALLY SEMI-ELLIPTICAL GROOVED TUBE USING HYBRID NANOFLUIDS /
Principles of Mechanical Engineering /
DESIGN AND DEVELOPMENT OF A NOVEL BIODEISEL PROCESSOR AND PERFORMANCE ANALYSIS OF B1OO BIO DIESEL PRODUCED FROM SOYBEAN OIL / Md.Shihab Uddin, Sarjil Mehedi, M A.Masum Bulbul Chowdhwary.
DESIGN AND FABRICATION OF A VAPOR ABSORPTION REFRIGERATION SYSTEM / Mosharrouf Hossain, S.M Rafid Rahman, Saadman Shoumik.
STUDY OF SMALL AND MEDIUM ENTERPRISES (SME) PRODUCTS IN BANGLADESH: PERFORMANCE AND QUALITY IMPROVEMENT OF A SELECTED PRODUCT / Muksadur Rahman, Md Nazrul Huda Aslam, Jakia sultana.
A COMPARATIVE STUDY ON EMISSION OF GASOLINE AND NATURAL GAS DRIVEN VEHICLE ALONG WITH ITS EFFECT ON ENVIRONMENT AND HEALTH ISSUES / Capt Md. Rashedul Islam Lt. Most Irana Yeasmin, Khalid Bin Md Kamruzzaman, Zawad Abedin .
ONE DIMENSIONAL FLOW THROUGH PIPE / Md. Shakib Mamud, Md. Faisal Hasan, Kazi Abdul Al Moin Rumu.S M Mahid.
STUDY OF A SELF MADE BIOMASS STOVE AND ELECTRICITY GENERATOR FROM WASTE HEAT USING THERMOELECTRIC GENERATOR / Md. Mominul Haque, Md. Mahmoodul Haque, Imteaz Osmani, Md. Asad Hossain .
DESIGN AND FABRICATION OF A FLAT PLATE SOLAR HEAT COLLECTION WITH IMPROVED HEAT TRANSFER APPLICATION AND DATE ACQUISITION SYSTEM /
AERODYNAMIC PERFORMANCE ANALYSIS AND PROPULSION SYSTEM DESIGN OF AN UNMANNED AERIAL VEHICLE USING NACA 4415 PROFILE / LT Tarik, LT Nabila, Nayeema parvin .
HEAT TRANSFER CHARACTERISTICS OF A CLOSED LOOP PULSATING HEAT PIPE WITH FIN AND WIRE INSERT / Lt. Tauhidul Islam, Rasel A Sultan, Noor Mohammad Hasan.
DETERMINATION OF CO-EFFICIENT OF PERFORMANCE (COP) OF A VAPOR COMPRESSION REFRIGERATION CYCLE USING DIFFERENT REFRIGERATION'S / S M Sabahat Hossain, Md. Tanjirul Islam, Md. Abir Mahmud .
STUDY AND DEVELOPMENT OF EXHAUST SYSTEM,ANALYZING THE PERFORMANCE AND REDUCING EXHAUST NOISE OF A CAR, TOYOTA E-90 / Navid Anjum, Amitava Ghosh Dastidar, Rajib Uddin Rony, Reasat Azam .
IMPROVEMENT OF VEHICLE EXHAUST BY USING MUSTARD OIL BASED BIO DIESEL / Shafquat Hasan Noor, Susmony Datta, Khandokar Shoveet Faraz .
A COMPARATIVE STUDY OF FULL PROPERTIES, PERFORMANCE TEST AND EXHAUST GAS ANALYSIS WITH THE CONVENTIONAL FOSSIL DIESEL, NEAT BIO DIESEL AND THEIR BLEND / Hossain, Md. Alamin, Shabab Mottauin Chowdhary, Monzur Ul Islam
THE EFFECT OF ETHANOL AS WORKING FLUID ON THE PERFORMANCE OF DIFFERENT TYPES OF CLOSED LOOP PULSATING HEAT PIPE / Mehrin Chowdhury, Sanjida parveen, Nawshad Arslan Islam, Sayed Mahmud Mufti.
EXPERIMENTAL INVESTIGATION THE PERFORMANCE OF OPEN LOOP PULSATING HEAT PIPE / Halima Khatun Tahmin, Rumana Parvin Rinky, Afrina Khan Piya, Tonima Afrose.
HYDROGEN GAS, AN ALTERNATIVE ENERGY SOURCE FOR IC ENGINE / K M Shohidullah Ferdous Priyo, Chowdhury Raihan Uddin, Atika Khan. .
EXPERIMENTAL STUDY OF FORCED CONVECTION HEAT TRANSFER THROUGH TUBES WITH LON / Flo Amina Ahmed Suria, Salma Noor Jahan, Nusrat Jahan .
ANALYSIS OF METEOROLOGICAL DATA OF BANGLADESH AND CONSTRUCTION OF A MODEL OF MICRO HYDRO POWER PLANT / Mohiuddin Siddique, Syeda Bushra Haider, Maliha Maisha Rahman
RAIN WATER HARVESTING AND UTILIZATION / Md. Arif Hannan, Ashek Ahmed, Md. Saiful Islam, Md. Hafizur Rahman Khan .
A COMPREHENSIVE DESIGN AND CONSTRUCTION MACHINE AND ANALYSIS OF COCONUT OIL / Mahmudul Hasan Kawser, Humaun Kabir, Flt. Lt. GDP Premadasa, Nazratun Nayeem .
FABRICATION AND PERFORMANCE OF A LOW COST CONTROLLED ROBOTIC ARM FOR INDUSTRIAL APPLICATION / Mushfik Ul Alam Radient, Sanad Ranjan Saha, Md. Kamrul Islam Patwary.
STUDY OF COST –EFFECTIVE CRYSTALLINE TYPE SOLAR CELL MANUFACTURING PRACTICES AND CHARACTERIZATION TEST IN BANGLADESH / Antara Majumdar, Fariba Mohammadi, Ali Ahmed .